Date: November 1st, 2009 3:39 PM Author: know-it-all low-t chapel
More or less... what can I do for you?
I think I already accidentally outed my UG institution, so don't bother asking.
Majored in EE and another moderate TTTscience. Jobs have ranged from admin assistants to programmers. Lost my job at a top semi-company last year (didn't bring me back full time).
Date: November 1st, 2009 3:55 PM Author: know-it-all low-t chapel
Test my engineering knowledge... at least outside of some of the more advanced programming subtypes (like PWM modulation/SQL & HTML linked hardcoding in chipsets etc). I can basically do anything as far as circuit design.
Date: November 1st, 2009 4:06 PM Author: know-it-all low-t chapel
Possibilities of what you mean:
1) Magnetic pole ie. in an electromagnet using a SMPSU for a motor (+ or -)
2) The Pole piece of a motor (ie. the steel portion of an electromagnetic motor that created a magnetic gap). In AC motors this can be Permanent or electromagnetic (monopole, bipolar etc), etc
Honestly, if you had just left your answer as magnetic pole or whatever, I wouldn't be so sure, but the fact that you tried to be comprehensive in your answer, and still left out the definition of a pole in bode plots, is fairly convincing that ur bad flame. Even EE from TTT schools should know what bode plots and poles are.
Date: November 1st, 2009 4:24 PM Author: know-it-all low-t chapel
And?
I would almost guarantee that you don't know how to actively bias a 20v/10A x 6 channels gate at 10khz or design a PWM circuit capable of switching 1200v @ 700A with vector control.
Date: November 1st, 2009 4:36 PM Author: know-it-all low-t chapel
I've done plenty of FEMM and know what the fuck bode plots/filtering and all this shit is... however, what amazes me is that someone would ask "what is a pole" in EE and expect a complete answer.
A proper answer to that question could be as simple as "one terminal of a polarized cap"... the silly part about this is he didn't bother asking something more specific such as: "What is a gate" which only has one meaning... or "what is a bootstrap filter".
Hell, I would have accepted "How do you design a DC-to-DC supply" and could have answered it with far more brevity.
Date: November 1st, 2009 5:31 PM Author: know-it-all low-t chapel
well I'm done trying so... you found me out... the bode plots wasn't sufficient but this was apparently (somehow despite this being a relatively easy question and something i know how to check).
Date: November 1st, 2009 5:24 PM Author: brass frum locale
A pole at of f at z = a is a discontinuity such that f(z)*(z-a)^n (filling in removable discontinuities) is continuous for some n.
Since cot z = cos z / sin z, and sin z only has zeroes of order 1, the poles of cot z (e.g. multiples of pi, the zeroes of sin z) are all order-1 poles.
Date: November 1st, 2009 6:04 PM Author: know-it-all low-t chapel
I didn't say it did... I said that inf isn't acceptable... I was saying that cont poles = every integer*pi to infinity.
Cot(1/z) does not have any points without a +/- infinity for poles besides what is called "local limits" because it is an infinitely decaying function... hence why I guessed 0.
So the period is actually pi not 2pi...I had a feeling whatever stupid question he asked would be a trick that only some person with high level EE would know and he didn't disappoint... I'm sure the right answer is something along the lines of "n*pi" n is 1-infinity.
Date: November 1st, 2009 5:43 PM Author: brass frum locale
Period of pi -> period of 2*pi, the former being a stronger statement. So I was correct to say that cot x had a period of 2*pi because I never said that was the least period.
You're right. The period of tan and cot is pi, because tan(x + pi) = sin(x + pi)/cos(x + pi) = -(sin x)/(- (cos x) = sin x/cos x = tan x.
Date: November 1st, 2009 6:09 PM Author: know-it-all low-t chapel
This is fine pensive... but cot(1/z) is infinitely expanding on both sides (but not in a period I don't think that resembles cot(x)) and would actually have an expanding slope and period as it approaches 0 where 0 would likely not exist. (ie. as it approaches 0 it will vibrate up and down infinite a lot) but on the other side it won't... hence... if there are points they are simply too small for me to give a shit
cot(1/10000 for instance is the same as cot(very small number) which is approaching infinity... so the graph itself likely has no solid z value that will work... I just guessed 0 though.
Unless you're pulling <1 numbers for Z out in order to find this...
Figuring this out in terms of z would be really really boring.
Stop saying shit like HYPSM when talking about engineering, those schools are not in the same tier.
MCBSM are what I think of as the top engineering schools, and I do not see an EE major from those schools being unemployed unless they are below median and have Asperger's.
Date: November 1st, 2009 6:34 PM Author: Dark big native jew
I know ME majors from top engineering schools w/o jobs but not CE or EE. I always thought CE and EE were in high demand. There are a shitton of foreigners that come here to fill the unmet demand.
Date: November 1st, 2009 6:37 PM Author: know-it-all low-t chapel
CE is more so than EE... but no you're actually wrong about that right now.
I suggest you talk to some kids from these schools. I know a LOT from my school and friends from intercollegiate sharing programs to these schools that don't have jobs and can't find any... especially if they aren't willing to move to Cali or the West.
No, people dont say MCS, you dumb ass. Engineering isn't obsessed with prestige. But to leave out Berkeley and Michigan in a list of top engineering programs would be retarded. If anything, I would drop Stanford from that list.
Date: November 1st, 2009 6:42 PM Author: know-it-all low-t chapel
lol that wasn't made up at all.
Saying "Math 105L" isn't going to fucking tell someone anything without context (since it's the highest level of calc you could take at such and such school)
Date: November 1st, 2009 6:53 PM Author: know-it-all low-t chapel
Ok... here's something you haven't learned in your "intro EE classes yet"
Please tell me how a 3-phase AC motor works... what signals are required... what is the standard method of control. How would you go about designing/progam a DSP to modulate frequency and level of PWM output in order to actively control something in order to provide usable torque on a AC motor at low RPM
Secondly,
Please tell me, what is mms, what is T in a gap, what is the saturation point of steel to magnetism...
NPN and PNP transistors differ in what way?
What is a gate and what is the function of an active negative bias gate.
Date: November 1st, 2009 6:57 PM Author: know-it-all low-t chapel
Lol... wrongo...
Please try again... You wouldn't learn most of that until your master's program.
Ok... let's try something really really simple:
If you FEMM'd a gap width of 0.5mm in a 2.5T gap (measured from the poles of course) what would the average functional magnetic force be across the gap?
How do you make a passive bandpass circuit of say 1k highpass and 20khz low pass
If you used an inverse optical filter on a PWM signal what would the resulting signal look like?
Date: November 2nd, 2009 11:26 AM Author: Vivacious Massive Garrison Gay Wizard
your flame is far more pathetic than the average attempt on this messageboard.
amazing series of math courses taught at this "HYPSM". differentiation is introduced in calc III, and vector plots are taught in calc V? is this a high school math syllabus?
Date: November 1st, 2009 6:50 PM Author: know-it-all low-t chapel
I did take the MCAT but really don't like the idea of being 32 before making money... so right now I'm back in a masters program for nursing admin at one of the better nursing schools.
I'd probably do CRNA if I don't get into HYS law this year like my LSAT/GPA predict I will.
Date: November 1st, 2009 6:50 PM Author: Light beady-eyed church building
to be fair,
He's still interviewing with places, but if worst comes to worst I think he'll probably just go fulltime at the military contractor that he's been working part time with during the school year.
Date: November 1st, 2009 7:09 PM Author: know-it-all low-t chapel
You have to enlist in these right?
This makes me wonder if my unemployed CE friends from UG are just being lazy and want to mooch off their parents... they sure do bitch about not finding good work though.
Date: November 1st, 2009 7:07 PM Author: Dark big native jew
if you're coming out of college, you're not going to be hired as a software architect or whatever the equivalent is for EE. You start at the bottom and work your way up. That's how it works.